| A Thread size | 4-40UNC | |
| L Insert lengths | .096 in | |
| OD Insert diameter | .181 in | |
| P Pilot end | .154 in | |
| Base panel material | Plastic | |
| H Hole diameter | .157-.161 in | |
| W Min. wall thickness | .063 in | |
| Materials | Brass | |
| Surface Treatment | Cleaning | |
| Installation Equipment/Method | Heat Staking/Ultrasonic | |
Can you use threaded inserts in plastic?
Yes, you can use threaded inserts in plastics. Threaded inserts are often used to provide strong, durable threads in materials that are not inherently strong enough, such as plastics. They can help create more secure fastening points for screws and bolts.
When using threaded inserts in plastics, consider the following:
Insert Type: Select the type of threaded insert that is appropriate for your application. There are several types, including thermoset inserts, self-tapping inserts, and molded inserts.
Mounting Method: Depending on the type of insert, you may need to heat the insert to melt the plastic slightly (for thermoset inserts) or simply screw it in (for self-tapping inserts). Make sure the mounting method is appropriate for the specific plastic material you are using.
Plastic Type: Different plastics have different properties, so make sure the insert is compatible with the type of plastic you are using. Some plastics may crack or deform more easily.
Load Requirements: Consider the loads and pressures that will be applied to the Insert. Make sure the Insert is suitable for its intended use and that the plastic can withstand the loads without failure.
PILOT HOLE: If using a self-tapping insert, make sure to drill a pilot hole of the correct size to facilitate installation and prevent damage to the plastic.
By following these guidelines, you can effectively use threaded inserts in plastic applications.