Select region
English
English German Portuguese Spanish Russian
Talk to an Engineer
          Product Finder
          Leave Your Message
          QT-832x8.1-OD6.3
          QT-832x8.1-OD6.3
          QT-832x8.1-OD6.3
          662757243bbd746478.webp
          QT-832x8.1-OD6.3

          Quik-Tek Inserts

          QT Series Inserts

          The advantages:
          Ideal for thermoplastic parts
          Especially designed for thermal installation
          Screw-locked and low-tension anchoring
          High pull-out values
          Efficient installation due to single-spindle, 
          multiple spindle or automatic machines with preheating device
          Designed for thermoplastic plastics (PPS. ABS、PP etc.)

             
          Installation:
          The QT thread insert is heated to the melting temperature of the plastic.
          As a result of the heat transfer upon insertion,the plastic is plasticised for a short
          time and flows into the undercut of the thread insert.Upon cooling,a low-stress
          interference is realised.

          REQUEST SAMPLES
          TECHNICAL PARAMETER
          FAQ
          A  Thread size 8-32UNC
          L  Insert lengths .321 in
          OD  Insert diameter .248 in
          P Pilot end .218 in
          Base panel material Plastic
          H  Hole diameter .220-.224 in
          W  Min. wall thickness .083 in
          Materials Brass
          Surface Treatment Cleaning
          Installation Equipment/Method Heat Staking/Ultrasonic

          QT Series Inserts1hj

          How do you unscrew a threaded insert?

          Unscrewing a threaded insert can be difficult, especially if it is firmly secured or the surrounding material is damaged. Here are some methods you can use to remove a threaded insert:

          1. Drilling
          Materials Required: Drill and Drill Bit.
          Steps:
          Drill into the insert: Use a drill bit that is slightly larger than the inside diameter of the insert. Carefully drill into the center of the insert.
          Remove the Insert: When drilling, the insert may break or become loose and need to be removed with pliers or a magnet.

          2. Heating method (for metal inserts)
          Materials Required: A heat source (such as a soldering iron or heat gun).
          Steps:
          Heat: Carefully apply heat to the insert. This can help the metal expand and break up any adhesive or corrosion that may be holding it in place.
          Unscrew: After heating, use pliers to turn the insert counterclockwise.


          Tip:
          Always wear safety glasses and gloves when using tools.
          If the insert is made of delicate material, be careful to avoid damaging the surrounding area.
          If you are unsure or the insert is particularly stubborn, consider consulting a professional for help.
          By following these methods, you should be able to successfully unscrew the threaded insert.