| A Thread size | M2x0.4 | |
| L Insert lengths | 4.0 mm | |
| OD Insert diameter | 3.6 mm | |
| P Pilot end | 3.1 mm | |
| Base panel material | Plastic | |
| H Hole diameter | 3.2-3.3 mm | |
| W Min. wall thickness | 1.3 mm | |
| Materials | Brass | |
| Surface Treatment | Cleaning | |
| Installation Equipment/Method | Heat Staking/Ultrasonic | |
How to do thread inserts?
To install a threaded insert, you can follow these general steps, which may vary slightly depending on the type of insert you are using (such as a rivet nut, or wood insert). Here are basic guidelines for each type:
1. Coil Insert
Materials Required:
Coil Insertion
Coil Insert installation tool
Drill and tap sets
Drill bit (appropriate size for the insert)
Tap (matching the insert size)
Lubricant (optional)
step:
Drilling: Use a suitable drill bit to drill a hole in the material. The size of the hole should match the specifications of the Heli-Coil Insert.
Tapping: Use a tap to create internal threads in a drilled hole. Make sure to use lubricant to ease the tapping process and reduce wear on the tap.
Insert Coil Insert: Use the installation tool to thread the coil Insert into the threaded hole. Make sure it is fully seated and flush with the surface.
Remove Installation Tool: Once the insert is in place, remove the installation tool.