Select region
English
English German Portuguese Spanish Russian
Talk to an Engineer
          Product Finder
          Leave Your Message
          Self-Clinching Nuts – Type LCLA (2).png
          Self-Clinching Nuts – Type LCLA (1).png
          LCLA-M3-2

          Type LCLA aluminum nuts are recommended for use in aluminum sheet with a hardness of HRB 50 or less on the Rockwell “B” scale.

          Self-Clinching Nuts – Type LCLA

          Unplated threads are sized to accept a basic go gauge after .00025” plating.

          Installation:
          Must always be carried out using a squeeze action-nevr a shock loadPunch a hole in the metal sheet to the size recommended in our technical data tableDe-burring of the hole is not recommended.Apply pressure to the head of the fastener sufficient to totally embed the clinching ring aroundthe entire circumference and bring body in contact with the sheet.Insert fixing screw or bolt from side opposite to the fastener body.

          REQUEST SAMPLES
          TECHNICAL PARAMETER
          M  Thread size M3x0.5
          Shank Code 2
          A  Shank Max. 1.38
          Min.Sheet Thicknes 1.4
          Hole Size in Sheet + 0.08 4.75
          C Max. 4.73
          E ±0.25 6.35
          T ± 0.25 2
          Min.Dist. Hole C/L To Edge 5.6
          Fastener Material Aluminum
          Standard Finish No Finish, None
          For Use in Sheet Hardness HRB 50 / HB 82 or Less
          Base Panel Material Aluminum, Steel
          Technology Type Self-Clinching
          Self-Clinching Nuts – Type LCLA DATA