Select region
English
English German Portuguese Spanish Russian
Talk to an Engineer
          Product Finder
          Leave Your Message
          LTPS-Self Locking Pilot Pins Manufacturer.png
          LTPS-Self Locking Pilot Pins Manufacturer2.png
          LTPS-5mm-20ZI

          Self-clinching studs are installed by placing them in properly sized holes in the sheets and squeezing into place with any standard press. The squeezing action embeds the head of the stud into the sheet. The metal displaced by the head flows smoothly and evenly around the ribs and into the annular groove – creating a flushhead assembly and securely locking the stud into the sheet with high torque-out and pushout resistances.

          Self-Clinching Pilot Pins – Type LTPS, LTP4

          LTPS, LTP4 Pilot Pins satisfy a wide range of positioning, pivot, and alignment applications. The chamfered end makes mating hole location easy- Flush-head for sheet thickness of .040” and greater.
          Satisfies a wide range of positioning, pivot, and alignment applications.
          Chamfered end makes mating hole location easy.
          Type LTPS recommended for use in steel or aluminum sheets HRB (Rockwell “B” Scale) 70 or less and HB (Hardness Brinell) 125 or less.
          Type LTP4 recommended for use in stainless steel sheets HRB (Rockwell “B” Scale) 92 or less and HB (Hardness Brinell) 195 or less.

          Installation:
          Must always be carried out using a squeeze action-nevr a shock loadPunch a hole in the metal sheet to the size recommended in our technical data tableDe-burring of the hole is not recommended.Apply pressure to the head of the fastener sufficient to totally embed the clinching ring aroundthe entire circumference and bring body in contact with the sheet.Insert fixing screw or bolt from side opposite to the fastener body.

          REQUEST SAMPLES
          TECHNICAL PARAMETER
          Pin Dia. Code 5
          L ±0.4  Length 20
          Min.Sheet Thickness 1
          Hole Size in Sheet +0.08 5.5
          D ±0.15
          		 3.53
          H ±0.4 7.19
          S Max. 2.29
          Min. Dist. Hole C/L to Edge 7.6
          Fastener Material Steel
          Standard Finish Passivated and/or tested, Passivated and/or tested per ASTM A380
          For Use in Sheet Hardness HRB 70 / HB 125 or Less
          Self-Clinching Pilot Pins – Type LTPS data