Type LSKC-F Sheet Joining Fasteners -2.png

LSKC-F-1.5

Sheet joining fasteners are designed so that a PC board or panel can be quickly slipped into place and then removed from an assembly by simply sliding the board sideways and lifting it off.KEYHOLE fasteners can save valuable time and dramatically reduce the amount of loose hardware required. Type LSKC-F is designed so that two sheets can be quickly joined flat against each other. Typically, several Type LSKC-F fasteners are used with one standard threaded Type F flush nut which accepts a screw to secure the sheets against any unwanted movement.

KEYHOLE Sheet Joining Fasteners Type LSKC-F

Type LSKC-F – Allows detachable joining of two sheets
Clinch feature mounts fastener permanently into metal sheet.
Unique barrel design allows for quick “panel-on-panel” attachment and detachment.
Head is flush or sub-flush with one side of metal sheet.
Can be clinched into blind hole where concealed-head is required.
Makes horizontal or vertical component mounting possible.

Installation:
Must always be carried out using a squeeze action-nevr a shock loadPunch a hole in the metal sheet to the size recommended in our technical data tableDe-burring of the hole is not recommended.Apply pressure to the head of the fastener sufficient to totally embed the clinching ring aroundthe entire circumference and bring body in contact with the sheet.Insert fixing screw or bolt from side opposite to the fastener body.

REQUEST SAMPLES

TECHNICAL PARAMETER

APPLICATION FIEIDS

Face Mounting Designation Code	1.5
Sheet Thickness Code	1.5
A Max.	1
B ± 0.08	4.5
C Max.	5.39
H Nom.	6.02
M Max.	2.75
N ± 0.08	2.5
S ± 0.08	1.73
Panel 1 (Bottom) Edge Distance C1 Min.	3.80 mm
Panel 1 (Bottom) Mounting Hole B + 0.08	5.41 mm
Panel 1 (Bottom) Sheet Thickness Min.	1.00 mm
Panel 2 (Top) Edge Distance C2 Min.	4.10 mm
Panel 2 (Top) Mounting Hole A1 Nom.	1.50 mm
Panel 2 (Top) Mounting Hole A2 ± 0.08	3.00 mm
Panel 2 (Top) Mounting Hole A3 ± 0.08	5.00 mm
Panel 2 (Top) Mounting Hole A4 Min.	3.75 mm
Panel 2 (Top) Thickness Range	1.45 - 1.62mm
Fastener Material	2.75
Panel 2 (Top) Material	Any
Standard Material	300 Series Stainless Steel
Standard Finish	Passivated and/or tested, Passivated and/or tested per ASTM A380
Panel 1 (Bottom) Sheet Hardness Max.	HRB 70 / HB 125
Base Panel Material	Carbon Steel

Type LSKC-F Sheet Joining Fasteners data

AUTOMOTIVE As an experienced partner in the development of automotive fastening technology and ODMfields, our innovation has resulted in some of the most up to date vehicle concept realizations.
AEROSPACE For several decades, our wire screw thread inserts have been successfully emploved in theaerospace industry, With our customers, we strive to develop the fastening technologies oftomorrow,such as newmaterial composites.
RAIL There is a good chance you will find our technologies if you are looking at trams, trains, andrailway station infrastructure.
ELECTRONIC INDUSTRY There are a plethora of field applications by which In-saiL fastening technologies are used. Take for example an electrical switch box equipped with precision thread inserts.
CONSTRUCTION MACHINERY We develop customer-specific solutions for the full spectrum ofspecific requirements. Forexample, providing wire screw, thread inserts serving the purpose of locking devices for heavyvibration.
MECHANICAL ENGINEERING We thrive in combing complex and diverse mechanics with electronics. Fine-adjustmentcapability under dynamic load is a core competency of In-sail°mechanical engineering.
SOLAR With our products, leading technology is yours. Check out our field corner joints and solar modules.
MEDICAL ENGINEERING Precision craftsmanship is a pillar of our business model. We stop at no length to ensurereliabie operation and maintenance of medical equipment.